JN0-522 questions and answers

The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use ITCertKing's Juniper JN0-522 exam training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.

There are too many variables and unknown temptation in life. So we should lay a solid foundation when we are still young. Are you ready? Working in the IT industry, do you feel a sense of urgency? ITCertKing's Juniper JN0-522 exam training materials is the best training materials. Select the ITCertKing, then you will open your door to success. Come on!

Juniper JN0-522 exam is a very hot exam. Although it is difficult to pass the exam, the identification of entry point will make you easy to pass your exam. ITCertKing practice test dumps are your best choice and hit rate is up to 100%. And our exam dumps can help you solve any questions of JN0-522 exam. As long as you carefully study the questions in the dumps, all problems can be solved. Purchasing ITCertKing certification training dumps, we provide you with free updates for a year. Within a year, as long as you want to update the dumps you have, you can get the latest version. Try it and see for yourself.

While most people would think passing Juniper certification JN0-522 exam is difficult. However, if you choose ITCertKing, you will find gaining Juniper certification JN0-522 exam certificate is not so difficult. ITCertKing training tool is very comprehensive and includes online services and after-sales service. Professional research data is our online service and it contains simulation training examination and practice questions and answers about Juniper certification JN0-522 exam. ITCertKing's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Juniper JN0-522 certification, but also constantly updated exam practice questions and answers and binding.

Exam Code: JN0-522
Exam Name: Juniper (FXV,Associate (JNCIA-FWV))
One year free update, No help, Full refund!
Total Q&A: 160 Questions and Answers
Last Update: 2014-02-09

ITCertKing is a website to achieve dreams of many IT people. ITCertKing provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing Juniper certification JN0-522 exam? Have you thought about purchasing an Juniper certification JN0-522 exam counseling sessions to assist you? ITCertKing can provide you with this convenience. ITCertKing's training materials can help you pass the certification exam. ITCertKing's exercises are almost similar to real exams. With ITCertKing's accurate Juniper certification JN0-522 exam practice questions and answers, you can pass Juniper certification JN0-522 exam with a high score.

Have you signed up for Juniper JN0-522 exam? Will masses of reviewing materials and questions give you a headache? ITCertKing can help you to solve this problem. It is absolutely trustworthy website. Only if you choose to use exam dumps ITCertKing provides, you can absolutely pass your exam successfully. You spend lots of time on these reviewing materials you don't know whether it is useful to you, rather than experiencing the service ITCertKing provides for you. So, hurry to take action.

JN0-522 Free Demo Download: http://www.itcertking.com/jn0-522_exam.html

NO.1 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B

Juniper study guide   JN0-522   JN0-522

NO.2 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B

Juniper   JN0-522   JN0-522 questions   JN0-522   JN0-522

NO.3 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A

Juniper   JN0-522   JN0-522 exam simulations   JN0-522 questions

NO.4 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D

Juniper exam dumps   JN0-522   JN0-522   JN0-522 certification training

NO.5 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D

Juniper test answers   JN0-522 questions   JN0-522 exam prep   JN0-522 exam dumps

NO.6 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D

Juniper   JN0-522   JN0-522 exam   JN0-522 certification training

NO.7 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C

Juniper demo   JN0-522 test   JN0-522

NO.8 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A

Juniper   JN0-522 braindump   JN0-522   JN0-522

NO.9 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C

Juniper   JN0-522   JN0-522 test answers   JN0-522   JN0-522

NO.10 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D

Juniper   JN0-522 certification   JN0-522 braindump   JN0-522 certification training   JN0-522   JN0-522

NO.11 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B

Juniper demo   JN0-522   JN0-522

NO.12 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D

Juniper   JN0-522 braindump   JN0-522   JN0-522 exam dumps

NO.13 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C

Juniper   JN0-522 certification   JN0-522 exam prep   JN0-522 original questions   JN0-522 answers real questions   JN0-522

NO.14 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C

Juniper   JN0-522 test answers   JN0-522   JN0-522 pdf   JN0-522

NO.15 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B

Juniper   JN0-522 demo   JN0-522

NO.16 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D

Juniper exam   JN0-522 original questions   JN0-522 test

NO.17 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B

Juniper   JN0-522 study guide   JN0-522   JN0-522

NO.18 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C

Juniper original questions   JN0-522   JN0-522 answers real questions   JN0-522 test questions   JN0-522 exam dumps

NO.19 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A

Juniper   JN0-522   JN0-522   JN0-522 certification

NO.20 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A

Juniper exam prep   JN0-522   JN0-522

ITCertKing offer the latest 000-596 exam material and high-quality 70-482 pdf questions & answers. Our LOT-412 VCE testing engine and 70-687 study guide can help you pass the real exam. High-quality 70-486 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/jn0-522_exam.html